Science with neutrons
Foundations
Neutron temperature Flux · Radiation · Transport Cross section · Absorption · Activation
Neutron scattering
Neutron diffraction Small-angle neutron scattering GISANS Reflectometry Inelastic neutron scattering Triple-axis spectrometer Time-of-flight spectrometer Backscattering spectrometer Spin-echo spectrometer
Other applications
Neutron tomography Activation analysis · Prompt gamma activation analysis Fundamental research with neutrons: Ultracold neutrons · Interferometry Fast neutron therapy Neutron capture therapy
Infrastructure
Neutron sources: Research reactor · Spallation · Neutron moderator Neutron optics: Guide · Supermirror · Polarizer Detection
Neutron facilities
America: HFIR · LANSCE · NIST CNR -SNS Australia: OPAL Asia: J-PARC · HANARO Europe: BER II · FRM II · ILL · ISIS Neutron and Muon Source · JINR · LLB · PINS · SINQ Historic: IPNS · HFBR Under construction: ESS
v t e

Neutron reflectometry is a neutron diffraction technique for measuring the structure of thin films, similar to the often complementary techniques of X-ray reflectivity and ellipsometry. The technique provides valuable information over a wide variety of scientific and technological applications including chemical aggregation, polymer and surfactant adsorption, structure of thin film magnetic systems, biological membranes, etc.

Technical details[edit]

The technique involves shining a highly collimated beam of neutrons onto an extremely flat surface and measuring the intensity of reflected radiation as a function of angle or neutron wavelength. The exact shape of the reflectivity profile provides detailed information about the structure of the surface, including the thickness, density, and roughness of any thin films layered on the substrate.

Neutron reflectometry is a specular reflection technique, where the angle of the incident beam is equal to the angle of the reflected beam. The reflection is usually described in terms of a momentum transfer vector, denoted qzdisplaystyle q_z, which describes the change in momentum of a neutron after reflecting from the material. Conventionally the zdisplaystyle z direction is defined to be the direction normal to the surface, and for specular reflection, the scattering vector has only a zdisplaystyle z-component. A typical neutron reflectometry plot displays the reflected intensity (relative to the incident beam) as a function of the scattering vector:

qz=4πλsin⁡(θ)displaystyle q_z=frac 4pi lambda sin(theta )

where λdisplaystyle lambda is the neutron wavelength, and θdisplaystyle theta is the angle of incidence. The Abeles matrix formalism or the Parratt recursion can be used to calculate the specular signal arising from the interface.

The wavelength of the neutrons used for reflectivity are typically on the order of 0.2 to 1 nm (2 to 10 Å). This technique requires a neutron source, which may be either a research reactor or a spallation source (based on a particle accelerator). Like all neutron scattering techniques, neutron reflectometry is sensitive to contrast arising from different nuclei (as compared to electron density, which is measured in x-ray scattering). This allows the technique to differentiate between various isotopes of elements. Neutron reflectometry measures the neutron scattering length density (SLD) and can be used to accurately calculate material density if the atomic composition is known.

Comparison to other reflectometry techniques[edit]

Although other reflectivity techniques (in particular optical reflectivity, x-ray reflectometry) operate using the same general principles, neutron measurements are advantageous in a few significant ways. Most notably, since the technique probes nuclear contrast, rather than electron density, it is more sensitive for measuring some elements, especially lighter elements (hydrogen, carbon, nitrogen, oxygen, etc.). Sensitivity to isotopes also allows contrast to be greatly (and selectively) enhanced for some systems of interest using isotopic substitution, and multiple experiments that differ only by isotopic substitution can be used to resolve the phase problem that is general to scattering techniques. Finally, neutrons are highly penetrating and typically non-perturbing: which allows for great flexibility in sample environments, and the use of delicate sample materials (e.g., biological specimens). By contrast x-ray exposure may damage some materials, and laser light can modify some materials (e.g. photoresists). Also, optical techniques may include ambiguity due to optical anisotropy (birefringence), which complementary neutron measurements can resolve. Dual polarisation interferometry is one optical method which provides analogous results to neutron reflectometry at comparable resolution although the underpinning mathematical model is somewhat simpler, i.e. it can only derive a thickness (or birefringence) for a uniform layer density.

Disadvantages of neutron reflectometry include the higher cost of the required infrastructure, the fact that some materials may become radioactive upon exposure to the beam, and insensitivity to the chemical state of constituent atoms. Moreover, the relatively lower flux and higher background of the technique (when compared to x-ray reflectivity) limit the maximum value of qzdisplaystyle q_z that can be probed (and hence the measurement resolution).

References[edit]

External links[edit]

• Catalogue of neutron reflectometers at www.reflectometry.net


• Catalogue of data analysis software at www.reflectometry.net