Disambiguation: LNER Thompson Class A2

LNER Thompson Class A2/1
Ivatt 4MT 2-6-0 No. 43139 with train (left) arrives at Carlisle Citadel station while LNER Thompson A2/1 Pacific No. 60507 'Highland Chieftain' and train (right) waits for departure in August 1960
Type and origin Power type Steam Designer Edward Thompson Builder Darlington Works Build date 1944 Total produced 4
Specifications Configuration: ​  • Whyte 4-6-2 Gauge 4 ft 8 1⁄2 in (1,435 mm) Driver dia. 6 ft 2 in (1.880 m) Loco weight 98 long tons (100 t) Boiler pressure 225 psi (1.55 MPa) Cylinders Three Cylinder size 19 in × 26 in (483 mm × 660 mm)
Performance figures Tractive effort 36,385 lbf (161.85 kN)
Career Operators London and North Eastern Railway British Railways Class A2/1 Power class 7P6F Numbers LNER 507-510 BR 60507-60510 Withdrawn 1960 – 1961 Disposition All Scrapped

The London and North Eastern Railway (LNER) Thompson Class A2/1 was a class of 4-6-2 steam locomotives built at Darlington locomotive works during 1944. They were originally ordered as Class V2 locomotives, as designed by Sir Nigel Gresley, but were revised during construction into a 4-6-2 'Pacific' arrangement under the instruction of Edward Thompson.

Background[edit]

At the time Edward Thompson succeeded Sir Nigel Gresley as Chief Mechanical Engineer of the LNER in April 1941, Darlington works was busy building Class V2 mixed traffic locomotives. Although the V2 class were competent and powerful locomotives, Thompson did not like this design as it required more servicing than his own mixed traffic B1 class 4-6-0. He also envisaged a time when the V2s would be replaced by his own design of 'Pacific' locomotives, but would not receive authority to build a new class during the war.^[1] He therefore decided to build the final four V2 already authorised as experimental 'Pacific' locomotives along similar lines to his recently rebuilt A2/2 class. The revised design was authorised in August 1943 and the new locomotives built between May 1944 and January 1945.^[2]

Design[edit]

The pony truck of the V2 class was replaced by Thompson's own design of bogie and they had an extended smokebox. They retained the same boiler as the V2 class although the pressure was increased to 225psi, giving an increased tractive effort of 36,390 lbf (161.87 kN). The firebox was also the same as the V2 although these were the first LNER locomotives to be fitted with a rocking grate and ashpan. Rather than have all three cylinders driving a single axle Thompson adopted divided drive with the middle cylinder driving the first pair of driving wheels and the outside cylinders the middle pair. Thompson also abandoned the Gresley conjugated valve gear and instead fitted independent sets of Walschaerts valve gear to each cylinder.

Performance[edit]

The four locomotives of this design performed adequately but proved to be under-boilered for their size and lacked adhesion. They were less problematic than the A2/2 class, but did not distinguish themselves.^[3]

Accidents and incidents[edit]

No. 60508 Duke of Rothesay lying on its side, July 1948

On 17 July 1948, locomotive No. 60508 Duke of Rothesay was hauling a passenger train when it became derailed inside Barnet Tunnel, Hertfordshire due to a combination of faulty track and excessive speed. The whole train was subsequently derailed on points at New Southgate, London. One person was killed.^[4]

Withdrawal[edit]

All four locomotives were withdrawn from stock in 1960/1.

Stock list[edit]

Models[edit]

This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (April 2013) (Learn how and when to remove this template message)

Apple Green Engines produce a ready-to-run model of the A2/1 in 4 mm scale. PDK, Nucast, and DJH also produce 4 mm scale kits of the A2/1. Crownline have produced a 4 mm kit in the past, but this is no longer available.

References[edit]

• 
  Allen, Cecil J. (1962). British Pacific Locomotives. London: Ian Allan.
  


• 
  Boddy, M. G.; Neve, E.; Yeadon, W. B. (April 1973). Fry, E. V., ed. Locomotives of the L.N.E.R., Part 2A: Tender Engines—Classes A1 to A10. Kenilworth: RCTS. ISBN 0-901115-25-8.
  


• 
  Yeadon, Willie (1991). Yeadon's Register of LNER Locomotives, volume 3: Raven, Thompson & Peppercorn Pacifics. Irwell Press.
  

External links[edit]

Wikimedia Commons has media related to LNER Thompson Class A2/1.

• 
  The Thompson A2/1 Pacifics LNER Encyclopedia